| Nozzle choices: 6 | |
| Standard nozzle: #20 | |
| Nozzle range: #16 to #26 | |
| Nozzle trajectory: 22.5° | |
| Gear-drive: Isolated, grease lubricated gear-drive | |
| Factory installed rubber logo cap (ST-1600B) | |
|
FEATURES
|
Arc Adjustment: Moveable stops (left and right) arc adjustment |
| Arc setting: 40° to non-reversing 360° | |
| Ratcheting nozzle turret | |
| Telescoping rubber infill barrier on riser | |
| Adjustable speed of rotation: 0 to 65 seconds (180° at 120 PSI) | |
| Warranty period: 5 year component part | |
| Internal construction: Brass, stainless steel & ball-bearings | |
| Stainless Flexible Inlet Hose (ST-H30K) connects to PVC using it's 3" female NPT end |
ST ROTOR: ST-1600The ST-1600 and optional high-speed ST-1600HS rotors complement the ST-90 and STG-900 rotors by adding long-range capabilities. These enhanced radius rotors are perfect for football fields, where smaller radius rotors might fall a little short. They are even better for extra-wide field applications like soccer and field hockey. While the ST-1600 rotors are specifically designed for use on synthetic sports fields, they are also great for other applications such as pastures, horse arenas, zoo animal enclosures, dust control and even casual non-critical natural turf areas. ST-1600 rotors are available in two configurations: ST-1600B This model is a 5" pop-up with adjustable-arc and full-circle capabilities in one rotor. All internal components of this rotor are accessible from the top without disturbing the synthetic surface. It is ideally suited for installation within Hunter's ST-243642B vault, or in the natural turf that is sometimes adjacent to the synthetic field to be irrigated. ST-1600HSB This pop-up high-speed model provides rotation speeds up to 65 seconds at a 180° arc setting with 120 PSI operating pressure. If desirable, the rotation speed can be slowed by using the manual speed adjustment knob. ST-1600BR This model is a compact and unobtrusive riser-mounted rotor with adjustable-arc and full-circle capabilities. It’s perfect for those installations where it is preferable to keep all irrigation piping and equipment away from the synthetic surface. The riser-mounted configuration also allows existing synthetic sports fields to be retrofitted for irrigation without disturbing the playing surface. Riser-mounted configurations are typically installed at elevations that promote safety and protection from the rotor's high-flow water stream. ST-1600HSBR This riser-mounted high-speed model provides rotation speeds up to 65 seconds at a 180° arc setting with 120 PSI operating pressure. If desirable, the rotation speed can be slowed by using the manual speed adjustment knob.
|
 |
ST ROTOR AND MANIFOLD ASSEMBLY
 1. ST Infill Barrier System ST-IBS1600 The unique IBS rubber cover kit includes vertical rubber barriers to retain infill material creating a safe transition where the rotor pops up. The IBS can also be trimmed to create a flat exposed surface area. 2. ST Adjustable Hanger Bracket ST-BKT1600 This bracket supports the rotor within the vault and provides vertical elevation adjustments allowing for a perfect surface transition. 3. ST Manifold and Isolation Valve ST-BVF30-K Rated to 500 PSI working pressure, this 3" galvanized ductile iron assembly includes Victaulic™ type grooved connections, a butterfly isolation valve, a point of connection for the quick coupler, and a 1" brass drain valve. 4. ST Low-Loss, Slow-Opening Valve ST-V30-KV: Heavy-duty control valve for STK-6V. Valve: 3" Grooved Vic Type Opening Speed: ST-NDL-K regulates/slows ST-V30-KV opening speed Pressure Loss: Ultra Low (1.5 PSI at 325 GPM) Manual Control: Remote On-Off-Auto Selector and Solenoid (not shown) 5. ST Flexible Stainless Inlet Hose ST-H30-K 3" ultra-flexible stainless steel corrugated hose with stainless steel support braiding. Provides for minor offset and alignment of sub-mainline to the ST Manifold's inlet connection.
|
ST H-BLOCK MANIFOLD SUPPORTSST-SPT-K Adjustable support stands include a large footprint base made from recycled tire rubber and a 2" vertically adjustable support rail (two required under manifold).
|
 |
INSIDE THE ST SYSTEMOpen access to all components for ease of ongoing maintenance
|
 |
FROM THE TOPSmooth and safe surface area with quick-access ports
|
 |
ST VAULTS TOTAL TOP SERVICEABILITYHeavy-duty tapered fiberglass and polymer-concrete construction with pre-cast holes for rotor, quick coupler valve, and remote on-off-auto selector manifold assembly. The ST-V30-KV valve kit includes a remotely located On-Off-Auto selector and solenoid manifold assembly. These convenient features bring valve manual control functions and solenoid splice connections closer to the surface for easy access. Quick couplers provide a convenient source of water for washing down spills and water-soluble paint. Integrated in-vault design eliminates the need for additional quick coupler enclosures.
|
 |
ST ROTORS HAVE MANY USESWhile ST Rotors are specifically designed for cleaning and cooling synthetic turf sports fields, they are also great for other applications such as pastures, horse arenas, dust control and even casual natural turf area.
|
 |
HEADED AND SLOTTED SET SCREWReduces high incoming pressure to prevent misting and allows nozzles to operate at peak efficiency. Lower pressure produces larger water droplets that fight the effects of wind. PGP Ultra 4", I-20 4" and 6" 
|
 |
|
|
ST-243636BMain Cover: 24" x 36"Overall Height: 36" Body Weight: 170 lbs. Total Weight: 320 lbs. Base Pad: 42" x 48" Quick Access Ports: 2 |
I-20-04-PRBDiameter: 8¼"
|
PGP-04-PRBOverall Height: 22½"
|
