FEATURES
|
Number of stations: 75 to 225 |
Type: Modular Decoder | |
Enclosure: Outdoor metal, stainless steel, plastic pedestal | |
Full-color, high-resolution backlit display (reversible) | |
Independent programs: 32 | |
Start times per program: 10 | |
Station run times: 15 seconds to 12 hours | |
Optional Wi-Fi interface | |
Real-time flow monitoring (up to 6 flow meters and flow zones) | |
Up to 6 Pump/Master Valve outputs, Normally Open or Normally Closed | |
Flow Management (runs flow zones to specified capacity) | |
Monthly flow budgeting | |
Built-in Solar Sync® logic/Solar Sync Delay feature | |
SD card updates and log storage | |
12 selectable languages |
OPERATES ALL HUNTER ICD DECODERS
|
REAL TIME FLOW MONITORING (ACC2)This feature permits connection of a flow meter to recognize high or low flow conditions and react automatically to alarms. The controller learns typical flows for each zone of irrigation and then monitors performance during automatic irrigation. When incorrect flows are detected, the controller can identify the faulty station and shut it down. Use with normally-open or normally closed master valves. Alarm parameters are user-programmable. Flow totals are recorded in controller memory to report system water usage.
|
FLOW SCHEDULING / FLOW BUDGETINGThe ACC2 has built-in intelligence, with the ability to schedule stations on up to 6 flow zones simultaneously. It continually monitors the system for breaks, leaks and electrical faults, suspending irrigation and pinpointing the source should problems arise. It can even respond to sensor input with specific actions like switching water supplies when water levels drop, or initiating a program when soil moisture is low, and other creative special applications.
|
SOLAR SYNC DELAY / RAIN-DELAYThe Solar Sync Delay feature allows the user to postpone seasonal adjustment changes from being made by Solar Sync (for up to 250 days) during the establishment of new landscape. A user may specify a fixed percentage to be used during the delay period. The controller will automatically switch to sensor adjustment after the delay has timed out.
|
EASY RETRIEVE™ MEMORYA manual back-up utility that stores complete controller scheduling and setup information in back-up memory. This allows the saved watering schedule to be restored at any time. This can be used to set a controller back to its initial settings after tampering or at the beginning of a new season.
|
CONDITIONAL RESPONSEInnovative Conditional Response features use sensor input and other conditions to automatically take pre-programmed actions. Switch from one water supply to another during scheduled irrigation based on level sensors, automatically start specialty programs on sensor input, or create other responses to fit your unique needs with this all-new feature set.
|
PASSWORD PROTECTION WITH USER MANAGEMENTCreate multiple user IDs with individual PIN numbers and two levels of access. Crew level access allows manual operations and the ability to view programming. Admin level access allows for modifying programming and other settings. When User Management is enabled, operators will be required to enter their pin before operating the controller. You can even review user log-ins in the controller log.
|
MAINSAFE™ WATER SOURCE PROTECTIONMainSafe™ is an additional level of water source and mainline protection, above the flow zone level. Using a dedicated flow sensor and master valve, the MainSafe™ settings can protect long runs of mainline pipe, allow dedicated lines for manual irrigation, and monitor monthly usage budgets for multiple flow zones.
|
DELAY BETWEEN STATIONSUsers can program a delay between stations as the controller advances from one station to the next. This delay can range from a few seconds (to permit slow-closing valves additional time to close) to a much longer period of time (to allow pressure tanks time to recharge), based on user requirements.
|
CALENDAR DAYS OFF, BY DATEACC2 allows users to specify Calendar Days Off up to a year in advance. Create a list of dates on which the whole controller will not be allowed to run, regardless of Water Day settings.
|
SENSOR PROGRAMMABILITYThe ability to specify which program will be shut down in response to a specific sensor alarm. This allows programs unaffected by the sensor to continue automatic operations.
|
CYCLE AND SOAKThis water-saving feature allows the operator to specify a maximum cycle time for each single station in hours, minutes, or seconds, followed by a minimum soak time, to prevent runoff from slopes or saturated soil. The operator can enter any run time, and the controller will automatically divide it into cycles to allow the water to be absorbed during the soak periods. The feature is adjustable for each individual station or Block of stations for unique soil and site conditions.
|
ICD-100, 200, ICD-SENVýška: 15,7 " |
|
Metal Wall Mount
Výška: 3½ " |
|
ICD-400, 600Výška: 3½ "
|
|
Copyright 2006 - 2024 JV Intersad s.r.o.
Vytvoril MONUMENTAL | Tvorba web stránok